Wilenco newGIF animated
Screen GIF WFOL
Orafol Wideformat Mag webtile Generic
 SAiFlexi1995Mil WideFormatOnline 143x118px English
 
SE Lamidesk
 Ricky Wide Format Online3
 
SUBSCRIBE
Email:

Vivad banners achieve NCC fire performance compliance

“With recent testing of Vivad's long term frontlit and backlit banner vinyl, we have learned that without any modification these products already successfully achieve a Group 1 classification,” says Vivad MD Ewen Donaldson. 

vivad showcase
  photo: Vivad
vivad ewen donaldson

    "Good news": Vivad managing
        director Ewen Donaldson

 

“Understandably, some people in the signage industry might be a little perplexed trying to comprehend the building regulations when they want to apply a banner or a light box to the side of a building,” Donaldson says. 

“In recent years there has been a lot of commotion caused by flammable aluminium cladding. This has resulted in a number of changes to the regulations. These changes have affected where and how you can fix a banner, sign or light box to a building.

“In August this year, the ABCB released an advisory note which talks specifically about signage and what you need to do, in order to meet the National Construction Code NCC.”

In order to comply to the code, the sign must comply with all four of the following points:
• achieves a group number of 1 or 2; and
• does not extend beyond one storey; and
• does not extend beyond a single fire compartment; and
• is separated from other combustible signs by at least two storeys in the vertical direction.

“The good news on the first point is that with recent testing of Vivad's long term frontlit and backlit banner vinyl, we have learned that without any modification, these products already successfully achieve a Group 1 classification,” says Donaldson. “On the other three points, well, that will be up to the design of the sign.

“This should come as good news to the industry as it provides clarity on what is allowed, it is not too restrictive and it is easy to follow.”

vivad logo lkFor more detail, read the National Construction Code advisory note.

For pricing and ordering Vivad’s Group 1 Banners, Click here

In order to test the heat and smoke released during combustion, these materials are tested to by the AWTA to AS/NZ 3837:1995 the results are used to determine a group number for the standard AS 5637.1:2015