Vastex International has introduced a new, low cost F-100 Flash Cure Unit with a 41 x 41 cm heater that offers higher wattage per square inch than the F1-18 model it replaces, according to Mark Vasilantone, president.

The F-100 unit is offered in 120 and 240 volt models, both with a 1625-watt heater that carries a 15-year warranty.

Fixed heat shields on four sides of the enclosure allow positioning closer to the garment, improving edge-to-edge temperature uniformity for increased output and image quality.

Vastex low cost Flash cure unit
The lowest cost Flash Cure Unit offered by Vastex International, model F-100 is offered in 120 or 240 volts, with a 16 x 16 in. (41 x 41 cm) 1625-watt heater, delivering higher wattage per square inch/cm than the F1-18 model it replaces. Shown with optional wheels.

The F-100 unit is also equipped as standard with: an on/off switch; NEMA 6-15P (120V) or NEMA 6-15-P (240V) plug and international plugs; extra-large side handles; head leveler to adjust the heater parallel to the pallet; and a sturdy, four-leg stand with vertical adjustment collar allowing 360° rotation.

An optional Rotary Table with two vented steel pallets allows the F-100 unit to double as a low cost dryer.

Also optional is an Auto-Flash AF-120 or AF-240 upgrade that rotates the head into place above the pallet with the touch of a foot pedal, and automatically rotates the head away from the pallet after a user-adjustable dwell time has elapsed, to prevent over-flashing and under-flashing of garments.


Vastex Internation



Pin It