|
|
|
Australian & New Zealand 2nd hand Machinery for sale
|
|
Ads under 30 words are placed free of charge. Click here to send an ad or:
Send ad details to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Please remember to state location of equipment for sale)
Ads will run for approximately 120 days, unless we are advised to update or delete the ads.
Latest ads are at the top.
|
|
| Get more ad response by including it in our next Tuesday email broadcast to our 8000+ database of sign and print companies. Click here for details and application form. |
|
After you finish here, check out the latest wide format printing news, just click here to go there.
|
|
Beware of scams that operate from overseas. Never part with money until you have seen the equipment.
|
| |
(QLD, Gold Coast) I have a Mutoh VJ 1608 Flatbed & roll to roll printer for urgent sale. Includes roller tables, compressor, air filter / dryer system, bulk ink system, computer, Original Onyx Rip software, Inks. Value of all this about $90K+ BUT I am selling for $35K or looking for someone to take over the lease. Located on the Gold Coast - Email Charl.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
/ 0404461939
(Posted 28th JUly 2010)
|
| |
(NSW, Sydney) Vision 2448 industrial engraver Ideal for high volume & large format production work. 600mm x 1200 engraving area. 45mm Z axis lift. T slot table. With cipher controller & Software. $15,000 or make an offer Contact: Leanne 0412 618 164.
(Posted 28th July 2010)
|
| |
(ACT, Fyshwick) SEIKO V64S PRINTER – 1600mm wide, take-up and dryer units. New March 2010. Printed 1500 metres only. Fully maintained / serviced by Anitech. 2 new cartridges included. No RIP. As new condition. $24,000 inc GST. Phone 0438 788 272 or email
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 28th July 2010)
|
| |
(SA, Brighton) For Sale. Seiko 64s Colour Printer complete with latest Wasatch Rip and computer. Recently serviced and almost full set of genuine inks. Ready to print. Contact Darren at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
or phone 0414391300. Adelaide $9800
(Posted 28th July 2010)
|
| |
(NSW, Glebe) EPSON STYLUS PRO 9600 with 10/100 Network Card installed, a full set of inks plus 5 extra spare, and various roll and poster board media. Selling as one for AUD$2500. It is stored in Glebe NSW, Australia. You can contact me directly on my mobile +61405603415 or email
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
(Posted 27th July 2010)
|
| |
(QLD, Brendale) 6 HEAD CARAUSEL AND 6 BOARDS FOR SALE MAKE AN OFFER
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 27th July 2010
|
| |
(NSW, Central Coast) Multicam CNC Router,1500x2400 Z=150mm. 10 Months new. Mist spayer, 10hp vacuum pump for matrix vacuum bed, Enroute 4, tooling. $45,000 + GST Call Scott 0413456277
(Posted 27th July 2010)
|
| |
(NSW, St Peters) SEIKO Colour Painter 64S Solvent Printer Immaculate condition. Supplied with full Onyx software, monitor package and tower. Max print width-1600mm. $20,000 ONO. Available for pickup. Contact Mike: 9557 7400,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 27th July 2010)
|
| |
(NSW, St Peters) SEIKO Colour Painter 100S Solvent Printer, Immaculate condition, very little use. Excellent print quality for large graphics. Supplied with full software, monitor package and tower. Max print width-2600mm. $25,000 ONO. Available for pickup. Contact Mike: 9557 7400,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 27th July 2010)
|
| |
(QLD, Brendale) Colorbond Signwhite Sign Blanks for Safety Signs. Pre-Drilled and radiused corners. Approx 500 in total ranging in size from 80x80 to 800x800 Approx 500kg. Ex Mining Job. Still with protective plastic. Square, Rectangle & Triangle. $800+GST Brendale 0438141214
(Posted 26th July 2010)
|
| |
(QLD, Brendale) Sign Shop Relocation Sale at Brendale. QLD. Trimmers, Workbenches, GCC Cutter, Fletcher Substrate cutter, EzyTaper. Heaps of tools, substrates. (Coreflute, Comp.Alum, Signwhite etc.) Digital Media Cut Vinyl, App Tape, Packing materials etc. 0438141214
(Posted 26th July 2010)
|
| |
(VIC, Wheelers Hill) Mimaki Pro Series CG121, 1200 wide vinyl cutter for sale ..8 years old great condition not used much purchased new, cost me $10,000 sell for $3750. Any enquiries call Nick on 0418 104 324 machine located in Victoria
(Posted 23rd July 2010)
|
| |
(VIC, South Melbourne) Seiko Colourpainter 64S 64" (1626mm) wide with automated cleaning and priming station, 3 digitally-controlled heaters & automated take-up system Fair condition, needs some heads recovered or replaced, South Melbourne
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 19th July 2010)
|
| |
(VIC) Roland DG Camm-1 PRO CX-300 Vinyl Cutter. Purchased from Conect Enterprises in 2003, this Camm-1 Pro CX-300 has done an average amount of work and is in excellent condition as it has always been looked after, comes with a new Roland DG CX-300 cutting strip and a genuine Roland DG XD-CH2 metal blade holder.
Roland DG Colour CAMM PC-60. This Roland PC-60 thermal printer is in excellent condition and has done a small amount of work since we have owned it, the original owners had told us they did not use much either, comes with a few ribbons, stand, cables and drivers.
SignLAB 6.1e from Cadlink. Signlab is one of the leading sign software packages on the market today, although this is not the lastest version, it can be easily upgraded. This ENTIRE package is available for $6000.00. Please contact Mike: 0412 910 842
(Posted 19th July 2010)
|
| |
(VIC, Mornington) Second hand Roland SC-540 with Heater Upgrade. 1370mm Print and Cut, Good Condition, Full service history with Conect. Comes with Take Up Roller
Ready for pick up now. Price: $10,000.00 Tel: 03 5975 9188
(Posted 19th July 2010)
|
| |
(SA, Adelaide) ColorSpan UVR72 Flatbed Hybrid UV Digital Printer *In Excellent working order (still in production) *Prints Rolls or Rigid materials with UV inks *With computer, rip & some inks. *Being sold to make way for new machine. *Great entry level machine - 1800mm wide. *Fifth of the price of new machine. *Priced to sell $25,000 + GST ono ($125,000 new) http://www.pricescreen.com.au/custom.html -
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 14th JUly 2010)
|
| |
(QLD, Kippa Ring) Direct to Garment Textile Printer - LK3900 A3+ Flatbed Printer As New. 1 Ltr of each colour textile ink supplied. Print on T-Shirts and other surfaces. $8900 Inc GST. For more information, please call Wayne on 0415 410322
(Posted 7th July 2010)
|
| |
(NSW, Hornsby) Item # R2050 VERSA Compact 20. Variable speed, variable stroke, electronic dwell timer, micro adjustable printing bed, electronic counter, adjustable printing height to 4 " (10 cm), single phase 10 amp, portable on castors, Squeegees & Flooders. $3000 + gst. Loc: Syd
Item # R2088 INSTA Insta 520 Heat Press. Swing Away Model. 38 x 50cm heat area. $1690 + GST Loc: Syd
Item # R2087 HOTRONIX Heat Press . Model STX20. As New. Save yourself $700 on a new one. Heat Area 40x50cm. Digital temperature control $2100 Loc: Syd
Item # R2085 ADTEC RARE 6 Colour, 8 Station Carousel, rear clamp, large timber pallets, in working order with 1 head needing clamping feet replaced. An ideal machine for flash curing multi colour work as the 8 bases allows longer cool down period between colours. $ Reasonable Offers Loc: Syd
Item # R2083 MIGHTY PRESS Mighty Press USA built Heat Press 38 sq. heat area. Approx 4 years old, like new- has done next to no work. $1290 + gst Loc: Syd
All enquiries to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 7th July 2010)
|
| |
(VIC, Braeside) 6-COLOUR DIRECT TO SUBSTRATE PRINTING MACHINE (Melbourne, VIC) Direct Jet 1324 model printer. Six months old, only used 4 times, installed January 2010. No pre-coating or under coating required, up to 5760 dpi. Desk top model with small foot print. See website for more details http://www.hmhaustralia.com.au/dcs_direct_jets.html Phone Daryll: 03 9587 2587
(Posted 6th July 2010)
|
| |
(QLD, Morningside) 6.5 METRE LONG SCREEN PRINTING OVEN (Brisbane, QLD) FAST RUNNING, SUPER HOT OVEN, HANDLES LARGE QUANTATIES EASY! 6.5 Metres Long 1.45 Metres Wide Temperature Controls Max Temperature 150oC Great for an automatic printer Gets printed items dry fast. Phone Troy: (07) 3395 7053
6-COLOUR AUTOMATIC SCREEN PRINTING MACHINE (Brisbane, QLD) Commercial Printer that can handle a large workload. Print 6 Colours in 1 rotataion Individual head controls 1 - 3 strokes per head Runs on auto or Manual Foot Switch included Solid Design 5M's in diameter Easy to set up Screen Adjustments and locks. Phone Troy: 3395 7053
SCREEN PRINTING CONVEYOR BELT OVEN (Brisbane, QLD) sturdy oven that's a real work horse! Single phase, Professional, Sturdy Design , Max. Temperature: 120oC, 1.8M Long, Internal Fan, Perfect for Permaset inks. Phone Troy: 3395 7053
6 COLOUR, GILROW SCREEN PRINTING CAROUSEL (Brisbane, QLD) Professional Screen Printing Carousel used in Commercial capacity for many years Australian Made, 4 Printing Stations, Adjustable angle and width side clamps
(Posted 5th July 2010)
|
| |
(QLD, Gold Coast) Roland SP540V Eco Solvent printer with bulk inking system and 3 brand new heads. Completely refurbished by local dealer and 1 year warranty. $13500 Phone 0415581300
(Posted 1st July 2010)
|
| |
(QLD - Brisbane) Original Signblazer 06 & 5.5 Software packages. Includes USB or parallel port dongle & CD. Copy of Learning Guide & Font Book included. Various prices Brisbane Mike 0418151829
(Posted 1st JUly 2010)
|
| |
(NSW Marrickville) TEKA AIRFILTER for solvent printers (Roland, HP, Mimaki etc). Second Hand unit with 1.2kw of power, airflow rating of 180m3/h. $550 for details contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 30th JUne 2010)
|
| |
(QLD, Albany Creek) Roland - FJ500 Printer FOR SALE: Roland Dye Sublimation Printer excellent condition done very little work, regularly serviced, heads recently replaced, provides a quality print. This unit is priced to sell and includes :- Owners Manual, Bulk Ink Feed System, Automatic Take up Reel and Rip Software, The Machine can be viewed in Brisbane and samples print can be arranged. .... Sale Price $8000.00 ono For further details .. Contact Tony on 0418 150880 any time
(Posted 30th June 2010)
|
| |
(TAS, Launceston) Printall Pad Printer, As New condition, Automatic 2 color pad printing, fully automatic screen printing. Prints on Pens, Golf Balls, Cig Lighters, Stubby coolers, practically anything. Prints up to 1200 an hour Some consumables included, Exposure box for making plates, Packet of 20 New Plates, Emulsion sheets for screen printing side. For more info call 0416 772 166 Selling due to taking extended time off from field .
(Posted 26th June 2010)
|
| |
(NSW Castle Hill) Roland sp300v comes with loads of banner vinyl and heat press vinyl. in excellent working order call 0414819855 for details. $7,300 ono
(Posted 25th JUne 2010)
|
| |
(VIC, Gordon) FOR SALE One Only Demo Vivex solvent printer and two "Trade in" DGI printers.
A Great opportunity to puchase the latest Vivex High Resolution durable solvent ink printer. 2600mm wide, 12 industrial strength quality print heads, a proven high quality production printer. Fantastic Price.
Alternatively for a sign business in general or banner signage, an economical start with 2nd hand 2500mm wide mid range DGI solvent ink printer. Call Keith 0408 363 932 or visit www.signimage.com for more
details.
(Posted 25th June 2010)
|
| |
(NSW Central Coast) Multicam CNC Router,1500x2400 Z=150mm. 10 Months new. Mist spayer, 10hp vacuum pump for matrix vacuum bed, Enroute 4, tooling. $45,000 + GST Call Scott 0413456277
(Posted 25th JUne 2010)
|
| |
(WA, Joondalup) Seiko Colour Painter 64s 1650mm wide format full colour solvent printer.
Maintained and serviced by Anitech on a maintenance plan. No RIP.
$6000ono.
Graphtec FC4100-130 vinyl cutter. 1200mm wide. $800 ono
Phone Shane: 0407 389 994 or (08) 9300 0254
(Posted 24th JUne 2010)
|
| |
(QLD, Brisbane) Gravograph Rotary Engraver IS400, FOR SALE excellent condition, near new. Call 0413 911 700 or 0400 151 133
(Posted 24th June 2010)
|
| |
(NSW Maroubra) Canon iPF8000 44-inch 12-ink Printer. Little use, fully serviced, Urgent sale $4900 ono + GST, pick up only. Contact Nelson 0404897888 or
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
(Posted 23rd JUne 2010)
|
| |
(WA, Perth) For sale SEAL SW3300 Liquid Laminator, 1 year old, as new, in top condition. For laminating UV or Solvent digital printed Banners, Truckcurtains, Fleetgraphics ,etc. Comes with instructions. Inquiries 04 356 11 739 $78000.00
(Posted 22nd June 2010)
|
| |
(QLD, Albion) Neschen K1100E Cold Laminating Mounting Machine.
Excellent condition, easy to use complete with own mobile stand.
Price: $ 2000 O.N.O Tel: 07-3420-3736
(Posted 21st June 2010)
|
| |
(VIC, Melbourne) Roland SC-540 in great condition. Aftermarket ink used. Surplus to our needs. Comes with Computer including RIP. $9000+GST
HP Designjet 60" 5000 in great condition. Aftermarket ink used. Surplus to our needs. Comes with RIP. $4000+GST
Please contact Leon on (03) 93293833 or
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
. Will help with interstate buyers.
(Posted 16th JUne 2010)
|
| |
(NSW, Sydney) EFI VUTEKs
DES Pty Ltd, the Australian distributor of EFI, has just traded in a current model PV200 and PV320 UV printer, and these are available for immediate purchase. Call for model specification and pricing, or to arrange a demonstration. The printers are available for installation anywhere in Australia, and full operator training will be provided. Talk to us about low monthly lease costs or special purchase prices. Printers will be fully installed and have 3 month warranty. Don’t delay, generate more income now. Call us on 1300 728 411
(POsted 15th June 2010)
|
| |
(QLD, Milton)SEIKO 64S Solvent Printer Great condition only 5500metres. Comes with air purifier fan system. Max print width-1600mm. Fully Serviced by Anitech $9,000 ONO. Contact Don 0438 702172 or
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 7th June 2010)
|
| |
(NSW, Marrickville) HP 5500 Designjet printer in good working order. Going cheap. $1950.00 (in GST)
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 7th June 2010)
|
| |
(QLD, Upper Caboolture) Sieko 64s for sale in good condition $18.000 Phone Brad 0450 642 739 QLD
(Posted 4th June 2010)
|
| |
(QLD, Miami) ISUZU 1995 CHERRYPICKER INSULATED BOOM TOOL BOXES 4.2 Lt diesel 11.5 working height $20,000 ono. Tel: 07 5535 5033
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 2nd JUne 2010)
|
| |
(SA, Adelaide) ColorSpan UVR72 Flatbed Hybrid UV Digital Printer *In Excellent working order (still in production) *Prints Rolls or Rigid materials with UV inks *With computer, rip & some inks *Being sold to make way for new machine *Great entry level machine - 1800mm wide *Fith of the price of new machine. *Priced to sell $25,000 AUD + GST ono ($125,000 new) http://www.pricescreen.com.au/custom.html -
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 2nd JUne 2010)
|
| |
(NSW , Sydney) Genuine Roland and Graphtec general purpose blades 45 degree $20 ea. Call Tony 0412 743929
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 31st May 2010)
|
| |
(NSW, Smithfield) Canon IPF 9100 for sale. Almost brand new, hardly used and still with 4 months warranty. $16,000 including assorted media and stretcher bars.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 27th May 2010)
|
| |
(NSW, Sydney) Ergo-jig 4 Col x 3 Rot Base Carousel. Exc condition, Side Clamp, Stand, 3 flat platens, plus 2 others, bonus flash cure unit. $2950 + gst #R2051
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
| |
(NSW Sydney) Mighty Press Heat Press 38 sq. heat area. Approx 4 years old, like new- has done next to no work. Loc: Sydney $ 1290 + gst #R2083
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
|
| |
(NSW, Sydney) Keywell Vertical lift Semi Auto Printer, with vacuum area of 600 x 400mm, like new $6900 + gst. Loc: Sydney. #R2066 -
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 26th May 2010)
|
| |
(ACT) Supadry 100 Electric Dryer. 4.35m overall length, tunnel length 3.47m, teflon coated mesh belt with a width of 650mm, 3 phase power supply, steel rod elements. Cures waterbased inks in 1 pass. Loc: ACT $2400 + gst #R2064
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 26th May 2010)
|
| |
(QLD Brisbane)1 CAUROSEL 6 SCREENS, SIDE CLAMPS.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 26th May 2010)
|
| |
(WA, Osborne Park) DGI VTII 62-1600mm solvent inkjet printer USED. Ideal for printing large format PVC Banners.
Includes Photoprint Rip & Print software. $ 1950.00 (Packing & Freight not included) (08) 9445 3655
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 24th May 2010) |
| |
(QLD, Burleigh Heads) Sublimation Heat press for Sale. Kyungel korean shuttle press. Press bed is 1680mm by 1080mm. 5yrs old and seldom used. Consistent print quality is consistent. Burleigh Heads QLD. $20,000.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 24th May 2010)
|
| |
(NSW Sydney) Roland GX500 Precision Vinyl Cutter For Sale – Cuts up to 1195 wide at up to 850mm/second. Max. down force 350g. Excellent condition with Stand. Asking $5500. Have original cartons so can be repacked for shipping. Please Call Brad on 02 4571 1423.
(POsted 20th May 2010)
|
| |
(TAS, Hobart) For Sale Roland SP540V excellent condition 2 years warranty remaining, just completed servicing and comes with full set of inks. Located in Hobart Tasmania CBD. $ 14750ono Call Phil 0412 908 109
(POsted 19th May 2010)
|
| |
(ACT) Sparingly used JV3-160 Mimaki 1600mm printer. Well Maintained. Only used Mimaki original inks. Urgent Sale. $15,000 + GST. Offers considered. Please contact 0401643163
(Posted 15th May 2010)
|
| |
(QLD, Townsville) Roland AJ1000 - 2.5 m, 6 colour grand format printer. 3 stage heater and blower system. Automatic media feed and take up roller. Intelligent pass control and head protectors. 2 and a half years old. serviced every 6 months. Excellent condition. $58,000 inc GST. excluding packaging and freight. Email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
. Phone Geoff 0400 455 405
(Posted 15th May 2010)
|
| |
(VIC, Burwood) SMALL PAD PRINTER SELL $ 700 Ph: 03 9808 2144 Max
(POsted 14th May 2010)
|
| |
(VIC, Bayswater) Printall Pad printer 2 colour pneumatic with Pads, Ink, Plate maker & Drying rack little use. $3000.00 + GST neg.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 11th May 2010)
|
| |
(VIC.) Mimaki JF-1631 UV Flatbed Printer (print area 1.6 x 3.1mtr) 2 years old. Serviced on regular basis and in very good condition. Urgent Sale, Price 40K+ GST. Please call Lance on 0417 353 191 or Shane on 0417 585 355 for more details
(Posted 11th May 2010)
|
| |
(NSW, Lillian Rock) DGI VTII-62 Solvent Printer for sale. Replaced printheads and suction unit. RIP software and dongle. I dont have sufficient work to keep this unit running so i am selling or trading on a smaller unit. $2999.00 Can be moved with small tilt tray truck. Price includes 1 roll sticker vinyl and 16l of solvent ink.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 10th May 2010)
|
| |
(QLD, Brisbane) Printall Multi print system, Combination colour pad printer, screen printing and foil printer system. Drying rack,UV plate and screen making exposing unit and compressor. $6,000.00 ONO 07 3890 8701 Email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 8th May 2010)
|
| |
(ACT) sparingly used JV3-160 Mimaki 1600mm printer. Well Maintained. Only used MIMAKI ORIGINAL INKS. Urgent sale. $15000 plus GST. Offers considered. Please contact 0401643163
(Posted 4th May 2010)
|
| |
(VIC, Melbourne South) Roland HiFi jet 52 inch printer, 6 color res 1440dpi, using pigment ink, good working condition, excellent canvas prints. only $3300, Located in South of Melbourne. start your own sign/ canvas printing business now call 0433 168 409
(POsted 28th April 2010)
|
| |
(QLD, Brisbane) HP Designjet 9000s 64” Eco Solvent printer. Brand new, never been started, never had ink in it. Buy now for just $23,000 + GST (original price $58,000 +GST). Located in Brisbane. Contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
or 0403 041 962.
(Posted 27th April 2010)
|
| |
(NSW, Castle Hill) I have 2 colorspan printers for sale with rips and lots of ink The Printers and Rips: ColorSpan giclée PrintMaker with Onyx PosterShop. ColorSpan Mach 8 with colormark embedded Rip and external Rip too. Lots of Ultrachrome and a set of Permachrome $10K 0404 463 275
(Posted 19th April 2010)
|
| |
(NSW, Cowra) Gerber Edge 1 with HS15 plotter. Good condition just serviced. Comes with Omega 2.1 software some vinyl & 15+ foils. $10,000 + gst. Contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 19th April 2010)
|
| |
(NSW Springwood) Canon W8200 Printer 95% full inks. User manual and software. Poster cutter and drying rack.Fujitsu black and white A3 scanner M3096GX Scsi driver. $3000 ono 0247516838
(Posted 15th April 2010)
|
| |
(ACT, Fyshwick) Conveyor Dryer Oven For Sale Conveyor Dryer belt width 60cm oven length 110cm, variable belt speed, 6KW of heating elements. Modern as new machine, $2800ono, Canberra. 62806565
(Posted 14th April 2010)
|
| |
(VIC, Knoxfield) For Sale Roland SP-540V Excellent condition still has 1 year warranty, very reliable, prints on 1370mm wide material, easy to use price $14500 ring Steve 0418 880 302
(POsted 14th April 2010)
|
| |
(NSW, Forster) I have for sale a As NEW Roland CX500 it has had very little use, (every one says that I know,but its true) Still have the box it came in. I am asking $5,500.00 ono. The machine is in FORSTER NSW. You can call me on 02 6555-7649 or E-Mail me on
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Graham
(Posted 14th April 2010)
|
| |
(NSW, Alexandria) Price: $39000 ONO 2008 Model EPILOG 36 EXT LASER MACHINE, 120 WATT. The machine is top of the Epilog range it cuts & engraves wood, plastic, paper, acrylic and etches onto aluminium. Full spec via www.epiloglaser.com ph: 0414 417 635
(Posted 13th April 2010)
|
| |
(Qld, Brisbane) 6 STATION CAROUSEL WITH SIDE CLAMPS GOOD REGO selling price $1200.00+gst
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 12th April 2010)
|
| |
(NSW, Kenthurst) Roland XJ740 Printer with bonus Roland SC500 Printer/Cutter, Applicator 2R60 Laminator, Versaworks and FlexiSign V7.5. Due to closure of business this equipment is no longer required. Extremely little use and still under Roland “heads and all” warranty for another 3 years. This printer is in perfect condition and has been regularly serviced by Roland certified technician. PRICE REDUCED TO $20,000 inc gst. Located in Sydney. Call Shaun 0425 254 409 or
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 9th April 2010)
|
| |
(QLD, Gold Coast) Mimaki JV3-250 Solvent Printer - Suitable for parts. Includes a 6 colour bulk ink system and two rolls of banner vinyl. Ready for pick up. $2500.00. Contact Andrew 07 55327899, Gold Coast Queensland.
(Posted 7th April 2010)
|
| |
(VIC, Mordialloc) 2.3 metre wide Guillotine , German made , Fully programmable. Machine located in Mordialloc,Melbourne Call Brad at Adco 039 9587 0988 , 0418 342 096
(POsted 7th April 2010)
|
| |
(NSW, St Peters) 2 x HP 5000 Designjet. Excellent condition. Print demonstration available. $3500.00 each. Available for pickup. Contact Mike, 9557 7400,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 7th April 2010)
|
| |
(NSW, St Peters) Seiko Colour Painter 100S Solvent Printer, Immaculate condition, very little use, Excellent print quality for large graphics. Supplied with full software and monitor package. Maximum print width -2600mm. $30,000.00 ONO. Available for pickup. Contact Mike 9557 7400,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
(Posted 7th April 2010)
|
| |
(NSW, Erskineville) Heat Press 700 mm x 1500 mm Made in Germany?!? Brand is KANNEGIESSER bought for project no - longer needed. $9,800.00 Phone 02 9557 3900
(POsted 6th April 2010)
|
| |
(TAS, Hobart) Neschen Accu-72X-UV Liquid Laminator Price: $60,000+ gst. Neschen Liquid Laminator, 1800mm wide. UV liquid laminate. Dry to dry, instant UV curing system. Laminate Digital Images, photographic images, dye-sublimation, inkjet, electrostatic, banner, colour copies, vehicle graphics. Designed for outdoor use. Machine located in Sydney Please email
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
for more details
(POsted 6th April 2010)
|
| |
(QLD, Parkinson) T-shirt Printing Equipment 6 colour, Flash Curer. 3m tunnel. All accessories $8000 ONO. Also Printall Pad Printer Complete system. $6000 ONO. Or buy the lot $12000 ONO. Brisbane. 0402 681 337
(Posted 6th April 2010)
|
| |
(ACT, Fyshwick) Flatbed UV printer 2m wide . Has been used to print corflute. Includes RIP Would suit screen printing shop wanting to expand. Unbreakable stainless steel heads. 360 x 720dpi $44,000 ph:02 6280 6433
(Posted 6th April 2010)
|
| |
(QLD, Ferny Grove) CNC Router area: 1230mm x 1250mm x Z=100mm 1.5kw water cool spindle Max. 24000 rpm USB DSP Hand Controller, Cast rigid construction.Just excelent $14500 Qld - Ferny Grove email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 5th April 2010)
|
| |
(VIC, Clayton) Roland Media Take-Up device + Fits on most Roland VP/SP/SC/FJ/SJ series printer. $400 incl. GST. Please call Huq @ 0430087052 or email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 4th April 2010)
|
| |
(VIC - NRTH MELB) Optima-1318 CNC Router by Woodpecker model K-182-B-ST1 in MINT condition - AS NEW. Can cut all types of wood, composite panels, acrylic etc. Cutting size is 1300x1800mm. Comes with Type 3 program and 1 day of training (pending distance to factory). Comes with all that is required to start production immediately. Will assist in shipping anywhere in Australia. Quick sale $$5950+GST Also for sale: HP Designjet 5000 60" with bulk ink system/computer/rip. Quick sale $2950+GST. For more information please call Leon @ Multiart on 03 9329 3833 or email interests to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 1st April 2010)
|
| |
(QLD, Buddina) Dusted & Frosted Designer Vinyl, 1270 x 50 metre rolls, Print receptive computer cut, Surplus stock, $400.00 a roll.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
, 0407 375 157
(Posted 30th March 2010)
|
| |
(VIC) Epson Stylus Pro 9000. Great working order! NO blocked heads! Comes with some spare ink, CD driver, Printed manuals etc. Pick up only. If freighted, buyer must organise. $1900.00. Ring for any other details. Genuine reason for selling. 0425 739 210
(POsted 27th March 2010)
|
| |
(NSW, Chipping Norton) Scitex Grandjet S3 - JV3000 Large Format Printer. Printer takes up to 3.2mtr wide material and is perfect for banner work and large graphics. Printer has be recently re-conditioned. In good working order. $48,000.00 enquiries contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 24th March 2010)
|
| |
(QLD) Texpress DSS 1800 Direct to Fabric Printer. $20k ono replacement value $78k. Call Johnny 0414 944 431
(Posted 24th March 2010)
|
| |
(NSW, Wollongong) letter-cut vinyl many colours to choose various widths 1 dollar per metre.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010) |
| |
(NSW, Wollongong) available 4 of 1.6m Jv-3 sp printers eco-solvent.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010) |
|
(NSW, Wollongong) available 5 of 1.6m Jv-22 printers ideal for dye sublimation.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010) |
(NSW, Wollongong) 300 dollars for 1.3 hot shoe Laminator fully automatic.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010)
|
(NSW, Wollongong) mutoh RJ8000 2.2 metres wide. free of charge.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010)
|
(NSW, Wollongong) DGI 1.6 solvent printer free of charge.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010)
|
(NSW, Wollongong) 3.4metre 24 head yesalan 1000 + 12 new xaar xj128 heads $1000
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 23rd March 2010)
|
(NSW) VUTEk PV200/600 UV hybrid printer, Very good condition, includes tables, roll to roll, Colorburst rip. Printer is located in NSW Ready to print. Call for price 03 9518 3100.
(Posted 23rd March 2010)
|
(NSW, Sydenham) Macdermit ColorSpan DMXII Di-based 12 colour printer. 1800mm wide. Comes with a rip server station. Comes with 15-50% full ink + 16 rolls of media.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 22nd March 2010)
|
(VIC, Kilsyth) HPZ3100 excellent condition. Comes with some ink and print heads. Ready to go Pick up from Kilsyth Victoria.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 22nd March 2010)
|
(VIC, Dingley) For Sale: Roland CJ 500 Aqueous/ Pigment ink Perfect working order complete o/haul Nite tech Bladder style Bulk Inker (New) Ideal for Dye Sublimation 54" wide.Melbourne.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 22nd Marc h 2010)
|
(VIC, Burwood) I have some MOUSE PENS you hold them like a pen. They work just like a mouse D9 serial plug. Cost $ 40. 03 9808 2144
(Posted 22nd March 2010
|
(NSW, Chipping Norton) Mutoh Rockhopper 2k Plus, 2.2mtr wide, 2 available. Both printers come with bulk ink systems and plenty of spare parts. Both printers were serviced regularly on a 6 and 12month service agreement with our supplier. Printers come with feeder and take up units. $7500.00 each. any enquiries contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 22nd March 2010)
|
(VIC, East Brunswick) 2x ECRM IMAGESETTER VR36 with HARLEQUIN RIP. $3000.00 + GST . With Macintosh Quadra 650 + dongle. Note: one is only good for parts as fault with laser.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 18th March 2010)
|
(VIC, East Brunswick) Roland automatic Take Up device system + Digitally controlled Dryer with timer. Also comes with x5 PVC cores that suite. Rolls Royce of all systems. $5000.00 + GST.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 18th March 2010)
|
(NSW, Silverwater) Canon W8200. Only a few hours of use. $15,000 new, sell for $7500 ono. Silverwater, NSW 9737 0004
(Posted 17th March 2010)
|
(QLD, Sunshine Coast) DUSTED & FROSTED DESIGNER FILM 1270MM X 50 METRE ROLLS COMPUTER-CUT & PRINT RECEPTIVE EXCESS STOCK APPROX 30 ROLLS OF EACH WE CAN ALSO SLIT ROLLS DOWN OR SELL IN SHORTER LENGTHS SUNSHINECOAST QLD
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 16th March 2010)
|
(QLD, Sunshine Coast) ONE WAY VISION VINYL, 1370 X 50 METRE ROLLS $400 A ROLL (ONLY 2 )
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 16th March 2010)
|
(NSW, Wollongong) 2 metre + Roll to Roll Fabric Heat Transfer Press as new very little use
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 15th March 2010)
|
(NSW WETHERILL PARK ) HP Designjet 5500 PS 60" with 2 Rolls, dye inks, in good working order $6500. Please Phone David on 0415 437 762
(Posted 10th March 2010)
|
(NSW MUDGEE) Roland CJ70 print/cut pigment aqueous ink working order. Roland PC50 operational, heads okay. Roland PNC1000 still works.OFFERS?? email
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Rob 0401 136 182
(Posted 10th March 2010)
|
|
(NSW, Warriewood) IP&I CUBE 260 UV Printer – flatbed/roll-to-roll hybrid, 6 colour plus white. Highly rated by Flaar. Prints direct to rigid substrates up to 95mm thick, or to rolls up to 2600mm wide. CMYK, lc, lm, plus 2 x white. Extremely well maintained and serviced regularly by GBC. Purchased new late 2006 for almost $300K. For sale $95K. Samples, photos, video, Flaar report available:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
or 02 9997 1000.
(Posted 8th March 2010)
|
(NSW, Arncliffe) Graphtec Vinyl Cutter - Cutting Pro FC5100-150, including registration eye for decal-cutting digital prints. Takes vinyl up to 1500mm wide. Working well - happy to demo to serious buyer. Pickup from Arncliffe (Sydney) for $3000 ono. (02)9599-4699.
(Posted 8th March 2010)
|
(NSW/QLD Lismore) , Mimaki JV3160sp 1600mm printer , extraction , take up & software. Immaculate well maintained ...( if you are after print and cut I would also consider selling cutter). PRICE REDUCED ... new printer coming need room , now $12650 Ph 0417 564 565
(Posted 1st March 2010
|
|
|
|
Wanted
|
|
|
(NZ, Christchurch) Wanted Roland cj-60 or cj-70 printer heads new or second hand.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 19th July 2010)
|
|
(VIC, Melbourne) Wanted SP300v roland printer. Prefer 2-3 years old
Victoria Melbourne, email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Mob: 0431 597 517
(Posted 20th JUly 2010)
|
|
(QLD Maryborough) WANTED - ROLAND SP540V print cut machine or similar with versa works and computer if possible and a cold laminator. must be in very good condition.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
- 0424 011 428
(Posted 13th July 2010)
|
|
(NSW, Sydney) Large format Epson Printer wanted, 9880 or 9900,
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 24th June 2010)
|
|
(VIC, Mornington Peninsula) WANTED. We require a Print/Cut machine like a Roland PC60/600 or such for making stickers for a car club.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 7th June 2010)
|
|
(NSW, Regents Park) Wanted Roland printer SJ645ex or similar preferably in or around Sydney.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 27th May 2010)
|
|
(QLD, Mitchelton) Wanted - Looking for Roland VersaCAMM SP 300 South QLD or North New South Wales
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 24th May 2010)
|
|
(VIC, Melbourne) WANTED : Photoprint 6 Rip Software SE Upgrade or Full Version discs /dongle. LOCATION : Eastern Suburbs ,Melbourne CONTACT : 0432 348 819
(POsted 21st May 2010)
|
|
(VIC, Melbourne) Wanted: Risograph drum needed. Black preferred or any other considered. Call Peter on 04 2571 3889. Can pick up in Melbourne area.
(Posted 3rd April 2010)
|
|
(WA, Busselton) WANTED, Laminator and guillotine for sign shop in W A.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 28th April 2010)
|
|
(QLD Sunshine Coast) wanted refillable cartridges for Roland FJ 600 OR WHERE TO BUY?
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(POsted 6th April 2010)
|
|
(VIC, Braeside )Wanted - Direct to Garment Printer. Any brand considered in any condition. Email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Ph: 0423985604
(Posted 6th April 2010)
|
|
(QLD, Sunshine Coast) WANTED LOG SLITTER TO CUT DOWN ROLLS OF VINYL & WINDOW TINT
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Posted 16th March 2010)
|
|
|
|
|
The HP Designjet L25500 printer with HP Latex Inks Technologies will be on display in WA for the first time.
|
|
Read more... |
|
